Cardan Shaft Alignment Bracketing Rental
Cardan Shaft Alignment Bracketing ALI 2.893
Cardan drives are installed and operated with a large offset between the driver and the driven shaft. Depending on the type of cordon shaft in place, a minimum deflection angle of the universal joints may be necessary in order to ensure sufficient lubricant circulation, which in turn prevents the universal joints from seizing.
For smooth operation the machines should be aligned such that the driving and driven machine shaft centerline are parallel. Precise alignment reduces the rotational irregularities of the cordon shaft to a minimum, so that the uneven bearing loading during cordon shaft rotation is also minimized, the service life of the components is extended and the chance of unexpected machine failure is reduced.
The Cardan Shaft Alignment Bracketing set ALI 2.893 Set used in conjunction with sensALIGN sensor and laser, and Rotalign Ultra IS allows precise measurement of machines joined by cardan shafts without having to remove the cardan shaft.
The Cardan Shaft Alignment Bracketing ALI 2.893 Set includes:
• Cardan rotating arm bracket
• Large chain type bracket
• 400 mm support post (6 pcs)
• 495 mm support post (6 pcs)
• 2.5 mm Allen Key 0 0739 1055 (2pcs)
• External inclinometer ALI 5.020 (2pcs)
• Carrying case
• Getting started guide
*Cardan Shaft Alignment Info source: Cardan Shaft Alignment Set Guide Pruftechnik, all Rights Reserved.